Ekip Dip; General Characteristics - ABB Sace Emax 2 Installation, Operation And Maintenance Instructions For The Installer And The User

Ekip Dip

1 - General characteristics

Families SACE Emax 2 can be configured with two families of Trip units:
Versions and main functions Ekip Dip is available in three versions: Ekip Dip LI, Ekip Dip LSI, Ekip Dip LSIG.
Presentation
28 | © 2022 ABB | 1SDH000999R0002 - ECN000232533
• Ekip Dip with interface via DIP switches
• Ekip Touch with touchscreen display
Both families provide protection and measuring functions related to signals from the installation and are
available in different models and versions.
Details of Ekip Dip are given in this document; for a description of Ekip Touch, consult document
1SDH001316R1002.
All versions provide the following functionalities:
• Measurement of installation currents
• Protection : depending on the measurements made and the parameters configured by the user, the
Trip unit checks for the presence of alarms and commands circuit-breaker opening if necessary
• Signalling : management of contacts and communication networks to optimize plant efficiency,
communication among different CB and other functions
The Ekip Dip functions are provided both by means of transducers and actuators inside the circuit-
breaker, and by means of a vast range of external accessories
Figure 67
Ekip Dip has a dip-switch (1) interface for configuring and verifying the protections and main parameters
(page 30).
The nominal size of the Rating plug (2) can be checked on the front (page 46).
All the external connections, including the supply and communication modules, the external sensors
and mechanical accessories, are available in the upper terminal box (3) (page 45 for an overview of the
electronic accessories).
ABB | SACE Emax 2
Ekip Dip | 1 - General characteristics