Introduction To Ekip Trip Units; Presentation; Families And Functionality - ABB SACE Emax 2 Series Instructions For Use Manual

Introduction to Ekip trip units

1 - Presentation

Families and functionality SACE Emax 2 can be configured with five different types of protection trip unit, distinguished by type of
4 | © 2018 ABB | 1SDH001316R0002 - ECN000086018 - Rev. C
interface and functionality. One trip unit has a dip-switch interface (Ekip Dip) while the others are equipped
with a touchscreen display (Ekip Touch).
Ekip Dip
Figure 1
All trip units have protection and measuring functions that refer to the primary currents of the installation and
are available in the following versions:
• Ekip DIP: LI, LSI, LSIG
• Ekip Touch: LI, LSI, LSIG
• Ekip Hi-Touch: LSI, LSIG
• Ekip G Touch: LSIG
• Ekip G Hi-Touch: LSIG
The Ekip Touch trip unit can be equipped with the Ekip Measuring module to extend the measurement
functions, or the protection and measurement functions (with the Ekip Measuring Pro module), to voltage,
power and energy.
NOTE: Ekip Hi-Touch, Ekip G Touch and Ekip G Hi-Touch trip units have the Ekip Measuring
Pro module mounted as standard.
The corresponding LCD model (Ekip LCD, Ekip Hi-LCD, Ekip G LCD, Ekip G Hi-LCD) is available for all Ekip
Touch versions if the installation must operate under particularly aggressive environmental conditions.
Ekip Touch is described starting from page 6.
The description of Ekip DIP is available on the website http://www.abb.com/abblibrary/DownloadCenter/ in
the installation manuals 1SDH000999R0002
breakers E2.2-E4.2-E6.2).
Ekip Touch
Ekip Hi-Touch
Ekip G Touch
Ekip G Hi-Touch
(for circuit breakers E1.2) and
Introduction to Ekip trip units | 1 - Presentation
ABB | SACE Emax 2
Ekip Measuring
Ekip Measuring Pro
1SDH001000R0002 (for circuit