WATER KETTLE SAFETY
ELECTRICAL REQUIREMENTS
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
USING THE WATER KETTLE
FILLING THE WATER KETTLE
Before First Use
Before using your Water Kettle, fill with water to the maximum level, boil; then discard
water.
IMPORTANT: The Water Kettle is designed to heat water only. Do not put any other
liquids or substances into the Water Kettle.
Press lid release button to open lid.
Fill Water Kettle with cold, filtered
1
water.
NOTE: There must be a minimum of 0.25 L
to operate.
6 | USING THE WATER KETTLE
W11238304A.indb 6
Voltage: 220-240 Volts A.C.
Frequency: 50-60 Hertz
Wattage: 2000-2400 Watts
For Brazil only:
Voltage: 127 Volts A.C.
Frequency: 60 Hertz
Wattage: 1600 Watts
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or service technician install an
outlet near the appliance.
Please remember to respect the
local regulations: hand in the non-
working electrical equipments to an
appropriate waste disposal centre. The
packaging material is recyclable. Dispose
of the packaging in an environmentally
friendly manner and make it available for
the recyclable material collection-service.
Lid release
button
Push lid down until it locks into place.
2
5/16/2018 12:20:27 PM