LG LSS-3200A Owner's Manual page 27

3-4. Connecting to Antennas - Oval Dish (Satellite A, B, C)
Antenna
Cable TV
wall jack
Receiving Signals
1. Connect the "Antenna" to the "ANT IN" jack on the DIRECTV
2. Connect the cable TV signal to the "CABLE IN" jack on the DIRECTV HD Receiver using a coaxial RF cable.
3. Connect "Output" of the multi-switch to the "SATELLITE IN" jack on the DIRECTV HD Receiver using a coaxial
RF cable. (For proper dish installation, refer to the "Installer's Guide" provided with your satellite dish antenna).
4. Connect the "Phone Wall Jack" to "PHONE JACK" on the DIRECTV HD Receiver using a phone cable.
NOTE
While you are a subscriber to a DIRECTV
program package, you can still view over-the-air
and cable TV
connections to the over-the-air and/or cable jacks.
* Sat C may also be connected via a SAT B/SAT C combiner with a 4x4 multi-switch (not supplied by LG).
LNB
Sat A
VIDEO OUT
ANT IN
1 2
DIGITAL
AUDIO
S VIDEO
OUT
CABLE IN
OUT
L1 L2
OUT TO TV
R1 R2
OPTICAL
AUDIO OUT
programs, if you make
LNB
Sat C
Dish
5x4 Multi-switch*
Output
COMPONENT OUT
(1080i i /720p/480p/480i i )
DATA PORT
Y
RGB OUT DVI-HDTV OUT
Pb
TYPE
Pr
(1080i/720p/480p) (1080i/720p/480p) (1080i i /720p/480p/480i i )
Phone wall jack
® HD Receiver using a coaxial RF cable.
NOTE
®
A triple LNB multi-satellite dish with a SAT
C LNB is required to receive all DIRECTV
High-Definition programming, along with
this DIRECTV HD Receiver.
LNB
Sat B
SATELLITE
RF
REMOTE PHONE IN
JACK
VCR
CONTROL
®
26