Charging The Battery - LG A916BM Owner's Manual

Table of Contents

Advertisement

Available languages

Available languages

3
Adjust the extension pipe by pressing the
length adjustment button
the pipe and sliding until it clicks into place at
the desired length.
• The extension pipe extends in four steps.
4
Press the Power button to activate the
Normal mode.
• To turn off the appliance, press the Power
button again.
Adjusting the Suction Power
Adjust the suction power using the suction power
adjustment button on the handle.
Power Button
a
• Press the Power button to turn the appliance
on or off.
• Press the Power button to activate Normal
mode.
Suction Power Up (+) Button / Turbo Mode
b
• Press the + button to increase the suction
power. (Normal
~
• Press and hold the + button for more than 3
seconds to activate Turbo mode from Power
mode.
Suction Power Down (-) Button
c
• Press the - button to decrease the suction
power. (Turbo
Power
~
on the back of
d
Power
Turbo)
~
Normal)
~

Charging the Battery

Before Charging the Battery
• Make sure that the adapter is connected to both
the charging station and the power outlet.
• Fully charging a single battery usually takes
about 4 hours. It will take twice as long to charge
both the main and auxiliary batteries.
• The battery will not be charged if the indoor
temperature is below 41 °F (5°C). Only charge
the battery when indoor temperatures are
between 41 °F (5°C) and 100 °F (38 °C).
• The battery will eventually need to be replaced.
Due to the battery characteristics, runtime is
shortened after using the appliance repeatedly
for an extended period.
• The last bar on the battery indicator begins to
blink when the battery needs to be recharged.
Use the appliance with a fully charged battery.
• If the main battery is charging on the charging
station, the auxiliary battery will only start
charging once the main battery is fully charged.
• To maintain battery life on dual-battery models,
swap the positions of the two batteries
periodically, between the main body and the
auxiliary charging station.
Charging the Product Body
Storing the appliance on the charging station
automatically recharges the battery.
1
Press the Power button to turn the appliance
off.
2
Put the product body onto the charging
station by aligning it to the hook
charging station.
• The battery level indicator starts to blink
and begins charging the battery.
• When charging is complete, the battery
level indicator lights up briefly and then
turns off to save energy.
OPERATION
17
of the
a

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

A91 series

Table of Contents