Cleaning The Nozzle - LG A916BM Owner's Manual

22 MAINTENANCE
4
Use the combination tool
off the motor.
• Do not wash the motor with water.
5
Clean the exhuast filter by brushing the dust
off it regularly and wash it in running water at
least once a month.
• To avoid odor and the malfunction of the
motor, allow the exhaust filter to dry
completely in a well-ventilated area out of
direct sunlight for at least 24 hours before
reassembling.
6
Clean the pre-filter by brushing the dust off it
regularly and wash it in running water at least
once a month.
• To avoid odor and the malfunction of the
motor, allow the pre-filter to dry completely
in a well-ventilated area out of direct
to clean any dust
d
sunlight for at least 24 hours before
reassembling.
7
Insert the clean, dry pre-filter and rotate the
exhaust filter to the locked position
reassemble it on the product body.
CAUTION
• Do not use the appliance without the exhaust
filter and pre-filter installed. Doing so could
result in product damage.

Cleaning the Nozzle

Clean the nozzle and rotating brush regularly.
CAUTION
• Always separate the nozzle from the product
body or remove the battery before cleaning. If
the nozzle starts to operate during cleaning, it
could cause an injury.
• Keep fingers away from pinch points when
assembling the nozzle on the appliance or the
rotating brush on the nozzle.
• Do not use the rotating brush as a wet mop.
Doing so may cause product damage.
Cleaning the Universal/Hard Floor
Nozzle
Clean the brush and roller heads before each use.
• If the brush contains foreign objects, the brush
may not spin or a noise may occur during
operation.
to
e