Legal Disclaimer; Safety Precautions - Philips WelcomeEye View Quick Start Manual

EN

Legal disclaimer

Safety precautions

Damage caused by failing to adhere to the manual nullifies the warranty. We will
not accept liability for damage resulting from non-compliance!
We will not accept liability for any harm to goods or people caused by improper
handling or failure to adhere to safety instructions.
This product was manufactured in total compliance with safety guidelines. In order
to maintain this status and provide for the best possible conditions of usage, the
user must adhere to the safety instructions and warnings in this manual.
: This symbol indicates a risk of electrical shock or short-circuiting.
- Only use this product with electrical current in the following ranges: 100-240 volts
and 50-60 hertz. Never attempt to use this device at a different voltage.
- Ensure that all the system's electrical connections conform to the instructions for
use.
- In commercial establishments, ensure that you adhere to the electrical installation
accident prevention regulations.
- In schools, training facilities, workshops, etc. qualified personnel must be on hand
to monitor electronic equipment operation.
- You must follow the instructions for use of any other devices connected to the
system.
- Please contact an experienced person if you have any doubts regarding
equipment operation or safety.
- Never plug in or unplug electrical equipment with wet hands.
- When installing this product, check that the power supply cables are not at risk of
being damaged.
- Never replace damaged electrical cables yourself! In this case, remove them and
call an expert.
- The mains supply should be located close to the device and must be easily
accessible.
- An easily accessible cut-off system (switch disconnector, circuit breaker, equivalent
system) must be integrated into the building's wiring installation for the
equipment connected to the power grid.
- Keep a minimum distance around the device to guarantee sufficient ventilation.
- Ventilation should not be blocked by covering the ventilation opening with an
object such as a newspaper, tablecloth or curtain, etc.
- No open flame source such as a burning candle must be placed on the device.
- Respect the product's operating temperature.
- The device must not be exposed to liquid flow or splashing. Do not place any
objects filled with liquid such as vases on the device.
- This product must be used in compliance with local and national legislation.
WelcomeEye View / V2