Lenovo IdeaCentre K210 5313 User Manual page 10

X-1 —— On-board VGA Card Connector: To connect with the signal cable
——— USB Connector: To connect USB devices.
—— Ethernet Connector: To connect LAN or broadband network
X-2 —— External VGA Card Connector: To connect with the signal cable
DVI —— External DVI Card Connector: To connect to the data cable of the
S-1 —— S Video Connector: To connect the data cable of the S video. (Some
——— Chassis Side Lock: After installing the side panel of the chassis,
——— Audio Line-in Connector: To connect audio input to the computer.
— Audio Line-out Connector: To connect to the speakers or
———— Microphone Jack: To connect to audio input from a microphone.
———— Used to attach your computer to a telephone line for modem use.
——— Used to attach a telephone line to your computer. (some models
31033098_IdeaCentre K UG_EN.indd 5
connection.
of a monitor. On computer models that have an external graphics
card, on-board graphics card signals are shielded and there are
no VGA signal outputs. (some models are equipped with this
connector.)
devices.
of a monitor. It connects with the data cable of the monitor. (Some
models are equipped with this connector.)
DVI connector. (Some models are equipped with this connector)
models are equipped with this connector.)
push the lock upward to lock the side panel in place. To remove the
side panel, depress the lock first.
headphones.
(some models equipped with this connector)
equipped with this connector)
5
User Guide
2008.2.20 6:40:07 PM