Notes On Computer Cabling And Installation - Lenovo IdeaCentre K210 5313 User Manual

Y-3 Connect to computer Audio-out

1.4 Notes on computer cabling and installation

C-1
C-1 Monitor power cord
C-3 Speaker audio signal cable
1. Connect the monitor signal cable to the on-board graphics card connector if the
model you purchased is not equipped with an external graphics card.
2. If there is an external graphics card, connect the monitor signal cable to the
VGA or DVI connector in the external graphics card.
3. If both your computer and monitor have the DVI connector, you can connect the
computer to the monitor through your own DVI data cable.
4. If there is only DVI connector in the external graphics card and the monitor only
have the VGA connector, connect the monitor data cable and DVI connector by
the DVI-VGA converter.
Notes:
• Keep speakers away from the monitor to avoid magnetic interference.
• Ensure the monitor-to-computer cable connections are secure, with screws
tightened.
31033098_IdeaCentre K UG_EN.indd 7
Y-6 Primary and secondary speaker
cables
C-2
C-2 Monitor data cable
C-3
7
User Guide
2008.2.20 6:40:09 PM