Table of Contents
Advertisement
Insert the memory
card
A memory card may already be inserted in the device.
If not, do the following:
1. Insert a compatible memory card in the slot. Ensure
that the contact area on the card is facing up and
towards the slot.
2. Push the card in. You can
hear a click when the card
locks into place.
Remove the memory
card
Important: Do not remove the memory card
during an operation when the card is being accessed.
Doing so may damage the memory card and the device,
and corrupt data stored on the card.
1. Before you remove the memory card, press the
power key, and select
applications are closed.
2. When
Removing memory card will close all
open applications. Remove anyway?
displayed, select Yes.
Remove memory
card. All
is
3.
Remove memory card and press 'OK'
displayed.
4. Press the memory card to release it from the slot.
5. Pull out the memory card, and close the memory
card slot cover. If the device is switched on, select
OK.
Antenna locations
Your device may have internal and external antennas.
Avoid touching the antenna area unnecessarily while
the antenna is transmitting or receiving. Contact with
antennas affects the communication quality and may
cause a higher power level during operation and may
reduce the battery life.
Switch the device on
and off
To switch on the device:
1. Press and hold the power key.
is
17
Advertisement
Table of Contents
