Advertisement
TECHNICAL DATA
Rated voltage
High speed
Low speed
Cutting line diameter
Cutting swath
Weight without battery pack and charger
Vibration level (in accordance with AS/NZS 60335.2.91Annex BB)
Rear handle
Front handle
Uncertainty of measurement
Noise emission level (in accordance with AS/NZS 60335.2.91 Annex CC)
A-weighted sound pressure level at operator's position
Uncertainty of measurement
A-weighted sound power level
Uncertainty of measurement
Guaranteed sound power level
Required torque to secure the trimming head
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test method and may be used to compare one
tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories
or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm,
organisation of work patterns.
BATTERY AND CHARGER
Model
ALT18BS6
Battery pack
L1860R
Charger
BL1218
Compatible
A18FB2, A18B4, A18FB4, A18FB5, L1815R, L1820R,
battery packs
L1825R, L1830R, L1840R, L1850R, L1860R, L1850R-X5,
L1860B, L1890R, L1860R-X5
SPARE PARTS
Model
Trimmer head
INTENDED USE
The cordless line trimmer is intended to be used only by adults who have
read and understood the instructions and warnings in this manual and can be
considered responsible for their actions.
The product is intended only for outdoor use in a well-ventilated area. For
safety reasons, the product must be adequately controlled by a two-handed
operation.
When fitted with the line trimmer head (and appropriate guard), the product
is intended for cutting long grass, pulpy weeds, and similar vegetation at or
about ground level.
The cutting plane should be approximately parallel to the ground surface. The
product should not be used to cut or trim hedges, bushes, or other vegetation
where the cutting plane is not parallel to the ground surface.
Do not use the product for any other purpose.
CORDLESS LINE TRIMMER
A18LTR14
ALT18B
A18FB4
–
BL1218
–
ALT18BS6/ALT18B/ A18LTR14
312699001
GENERAL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire,
and/or serious injury.
WARNING! When using the product, the safety rules must be
followed. For your own safety and that of bystanders, please read these
instructions before operating the product. Please keep the instruction
safe for later use.
WARNING! This product is not intended to be used by children or
persons with reduced physical, mental, or sensory capabilities. Children
should be adequately supervised to ensure that they do not play with the
product.
WARNING! Some regions have regulations that restrict the use of the
product. Check with your local authority for advice.
TRAINING
■
Read the instructions carefully. Be familiar with all controls and the proper
use of the product.
■
Never allow children or people who are unfamiliar with these instructions
to use the product. Local regulations may restrict the age of the operator.
■
Keep bystanders, children, and pets 15 m away from the area of operation.
Turn off the product if anyone enters the area.
■
Never use the product while tired, ill, or under the influence of alcohol,
drugs, or medication.
■
Keep in mind that the operator or user is responsible for accidents or
hazards occurring to other people or their property.
PREPARATION
■
Wear full eye and hearing protection while operating the product. If
working in an area where there is a risk of falling objects, head protection
must be worn.
27
ALT18B/ALT18BS6/A18LTR14
18 V d.c.
6200/min
5200/min
2.4 mm
280/330 mm
3.7 kg
4.4 m/s
2
6.6 m/s
2
1.5 m/s
2
85.9 dB(A)
2.5 dB
97.0 dB(A)
2.5 dB
100 dB(A)
50-80 kgf-cm
27
Advertisement
