Table of Contents
Advertisement
1MB Asynchronous Spindle Motors
2
Safety instructions
2.1
About this product
2.2
Intended use
Observe the general safety notes in this chapter and the safety instructions in
this documentation. Therewith, you avoid personal danger, damage and er‐
rors.
This operating instruction must be stored and transferred in case
of sale during the complete product lifetime.
Prerequisites for proper and safe use of the motors are proper transport, ap‐
propriate storage, proper assembly and connection, careful maintenance, op‐
eration and overhaul.
The motors have been designed for installation in industrial machinery. The
motors are according to the following standards and directives.
Standards
DIN EN 60034-1
Rating and performance behavior
DIN EN 60034-5
Degree of protection
Directives
2006/95/EG
EC Low voltage directive
(Appendix III B)
The machine manufacturer must evaluate the electric and mechanic safety
as well as environmental influences in the assembled state of the machine
according to the Machine Directive 2006/42/EC and DIN EN 60204-1 (safety
of machines).
The electric installation must comply with the protection requirements of the
EMC Directive 2004/108/EC. The plant manufacturer is responsible for ap‐
propriate installation (for example: physical separation of signal and power
cables, using shielded cables, ...). The EMC instructions of the converter
manufacturer must be observed.
Start-up is prohibited as long as the conformity with these directives is de‐
clared.
Safety instructions
R911337309_Edition 03 Bosch Rexroth AG
3/53
Advertisement
Table of Contents
