Table of Contents
Advertisement
20/53
Transport and storage
5.2
Storage instructions
5.2.1
Storage conditions
5.2.2
Storage times
Bosch Rexroth AG R911337309_Edition 03
Generally, Bosch Rexroth recommends storing all components until they are
actually installed in the machine as follows:
●
in their original packaging
●
at a dry and dust-free location
●
at room temperature
●
free from vibrations and oscillations
●
protected against light or direct sunlight
Upon delivery, protective sleeves and covers can be attached to Bosch
Rexroth motors. They have to remain on the motor for transport and storage.
Do not remove these parts until shortly before assembly.
Based on EN 60721-3-1, the tables below specify classifications and limit val‐
ues which are allowed for our products while they are stored. Refer to the de‐
tailed description of the classifications to take all of the factors which are
specified in the particular classification into account.
Allowed classes of ambient conditions during storage acc. to EN 60721-3-1
Classification type
Classification of climatic environmental conditions
Classification of biological environmental conditions
Classification of chemically active materials
Classification of mechanically active materials
Classification of mechanical environmental conditions
Tab. 5-3:
Allowed classes of environmental conditions during storage
For a better overview, some essential environmental influencing variables of
the previously mentioned classifications are listed. Unless otherwise speci‐
fied, the specified values are the values of the particular class. However,
Bosch Rexroth reserves the right to adjust these values at any time based on
future experiences or changed environmental factors.
Allowed classes of ambient conditions during storage acc. to EN 60721-3-1
Environmental factor
Air temperature
Relative air humidity
Absolute air humidity
Condensation
Direct solar radiation
Tab. 5-4:
Allowed storage conditions
Additional measures have to taken upon commissioning to ensure smooth
functioning – irrespective of the storage time which may be longer than the
warranty period of our products. However, this does not entail any additional
warranty claims.
1MB Asynchronous Spindle Motors
Symbol
Unit
T
°C
L
φ
%
ρw
g/m³
-
-
Not permitted
-
-
Not permitted
Class
1K21
1B1
1C1
1S10
1M11
Value
-25 ... +55
5 ... 75
1 ... 29
Advertisement
Table of Contents
