Using The E-Mail Report Function - Sony VPL-CWZ10 Help Manual

Help Guide
Data Projector
VPL-CWZ10/CXZ10

Using the E-mail Report Function

Configure the e-mail report function from the [E-mail Report] page.
Note
The entered value will not be applied until [Apply] is clicked.
Click the [E-mail Report] tab and display the [E-mail Report] page.
1
Select [Enable] in [E-mail Report].
2
Configure [Send to] and [CC].
3
Configure the [Report Timing] items.
4
Click [Apply].
5
Configure the [E-mail Account] items.
6
Check [Send mail test] and click [Apply].
7
A test e-mail will be sent to the set destination address.
Settings
[Send to], [CC]
Enter the destination e-mail address.
[Report Timing]
[Over Light usage time]: Send a report when the light usage time elapses the specified time. [Error]: Send a report
when the projector detects an error.
[E-mail Account]
96