Inspection And Maintenance - Honeywell Miller TurboLite MFL User Instruction Manual

7.0 Inspection and Maintenance

7.1 Operation and Inspection
WARNING: The user must perform the following operation checkpoints and
inspections prior to each use. In addition, a competent person must inspect
equipment at regular intervals, at least annually.*
*ANSI Z359.14 provides additional inspection requirements based on type of use and conditions of use. Refer to
7.1.2 ANSI Z359.14 Appendix A: Inspection Requirements for compliance with this standard.
CAUTION: Always wear gloves when inspecting wire
rope/cable units; broken strands can cause injury!
malfunctioning or damaged parts.
CAUTION: Do not let go of a lanyard/lifeline and let
it retract on its own; always maintain tension while
it retracts!
not use the unit if the lifeline does not retract properly.
checked regularly for signs of damage. Inspect for cuts,
cable for broken strands or chemical damage.
closely for damage, distortion, cracks, corrosion, or
be distorted or obstructed. The gate spring should exert
operate smoothly.
Us er In stru ctio ns - Engli sh
Inspect the
The braking mechanism
13
Fig. 9b
Inspect
Fig. 9d
Fig. 9a
Fig. 9c
Fig. 9e