System Compatibility - Honeywell Miller TurboLite MFL User Instruction Manual

Never use the device as a restraint or
positioning device.
MAINTENANCE
Do not lubricate this device.
The device must be kept clean and free of
contaminants.
from service if any part of the system
appears to be damaged or does not

3.0 System Compatibility

the system. This incompatibility may affect the reliability and safety of the total system.
3.1 Personal Fall Arrest System Components
A
The anchorage, also referred to as the anchor point or tie-off
connector, such as the cross-arm strap, D-bolt or rebar
hook anchor, is sometimes necessary to make a compatible
B
Full-body harnesses are engineered to aid in the arrest of a
exposed to a potential free fall.
C
Individually, none of these components will provide protection from a fall. However,
when used properly and in conjunction with each other, they form a Personal Fall Arrest
System that becomes vitally important to safety on the job site.
Us er In stru ctio ns - Engli sh
5
pass inspection, or if the unit has been
subjected to the forces of arresting a fall.
Do not attempt to service this device. If
properly or requires repairs, return the
device to the equipment manufacturer, or
service center authorized in writing by the
manufacturer, for repairs. [Units that do
not pass inspection and are not repairable
must be disposed of properly.]
A
B
C