Einstallation And Assembly; Introduction; Customer's Responsibilities; Disposal Of Packing - Electrolux SafeBox Hold Installation And Operating Manual

Sliding doors
EI = Power supply
EQ = Equipotential screw
E INSTALLATION AND ASSEMBLY
E.1

Introduction

WARNING
Refer to "Warning and safety
information".
To ensure correct operation of the appliance and maintain safe
conditions during use, carefully follow the instructions given in
this chapter.
Check and, if necessary, level the appliance after positioning.
Incorrect levelling can cause appliance malfunctioning.
E.2

Customer's responsibilities

The tasks and works required of the Customer are:
• check the floor planarity on which the appliance is placed;
• arrange an earthed power socket of suitable capacity for the
input specified on the data plate;
NOTE!
For information regarding the electrical connection,
refer to "A.11 Electrical connection".
E.3

Disposal of packing

The packing must be disposed of in compliance with the
current regulations in the country where the appliance is used.
All the packing materials are environmentally friendly.
They can be safely kept, recycled, or burned in an appropriate
waste incineration plant. Recyclable plastic parts are marked
as follows:
12
B = Bolting holes
Polyethylene
• Outer wrapping
• Instructions bag
Polypropylene
• Straps
Polystyrene foam
• Corner protectors
The parts in wood and cardboard can be disposed of,
respecting the current regulations in the country where the
appliance is used.
E.4

Positioning

CAUTION
The appliance is not suitable for installa-
tion outdoors and/or in places exposed to
atmospheric agents or high humidity.