Philips 6000 Series Manual page 4

Keypad
Fingerprint sensor
External power
connector
Cancel Confirm
Keyhole cover
03
Battery
compartment Setting Safe mode
First use
1. Insert 4 AA batteries into the external battery
box, then plug it in the external power connector
on the safe.
2. As shown in Figure 1, enter any �ngerprint or
simply touch the panel to wake up the keypad.
Enter default PIN code '1234' and press '#' to
con�rm. After hearing a voice prompt 'Unlocking
successful', open battery compartment inside the
safe and insert in 4 AA batteries to complete the
�rst use.
Attention: do not place the external battery box
inside the safe! Besides powering up the safe for
its �rst use, the external battery box is also for
emergency use when the main power supply is
down.
Figure 1
04