Table of Contents
Advertisement
14.
DO NOT alter or by-pass protective interlocks.
15.
DO NOT place jumper wires across fuses.
16.
DO NOT alter over-current protective devices.
17.
GROUND connections allow fault currents to flow directly into the ground instead of following through the
body then into the ground. ALL ELECTRICAL APPARATUS MUST BE PROPERLY GROUNDED.
18.
Use CAUTION when connecting test equipment probes to test points. SHOCK HAZARDS could exist at the
test points or in the test point area and/or TRANSIENTS induced by the problems could cause a MACHINE
ACTION.
19.
AVOID wearing a necklace, ring or chain that is made of a METALLIC substance.
20.
All electrical wiring and items related to electrical controls are, and shall always be, in compliance with
current National & Local Regulations.
When servicing, protect yourself by wearing protective equipment where required:
1.
Safety Glasses—Must be properly fitted and worn when a hazard exists.
2.
Gloves—Although it is recommended that gloves not be worn unless absolutely necessary, gloves can
protect the hands from cuts or abrasions caused by slings or sharp edges. Do not use gloves when working
on a tool with rotating equipment.
The TPM antenna system must be properly grounded. Each of the following must be grounded ultimately the
installation sites grounding system:
1. Transmission antenna's metal shielding (for products that include a metal shield)
2. The conduit between the transmission antenna and antenna enclosure
3. The antenna enclosure
4. Antenna stand or mounting structure
The antenna enclosure is marked with high voltage warning labels. The antenna system is capable of
generating high voltages. The enclosure cover should be kept in place during operation. Only trained, qualified
personnel should remove the enclosure cover.
Modulated Antenna User Manual - Prelim3
PERSONAL PROTECTIVE EQUIPMENT
GROUNDING
ELECTRICAL WARNING SIGNS
Page 4 of 10
1000 Brown Rd.
Auburn Hills, MI 48326
248.754.1900
jrautomation.com
Printed: 11/16/22
3:39 PM
Advertisement
Table of Contents
