Philips NORELCO 7700 Manual page 19

ENGLISH ENGLISH
36 36
C
4 Place new shaving head in the holder.
Make sure the notches on both sides of the
shaving heads fit exactly onto the projections in
the shaving head holder.
C
5 Hold the shaving head holder in your hand
1
and place the retaining ring on the shaving
2
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
Do not place the shaving head holder on a
surface, as damage may occur.
C
NOTE: Each retaining ring has two recesses that
fit exactly into the projections of the shaving
head holder. Turn the ring clockwise until you
hear a click to indicate the ring is fixed into
place.
6 Repeat this process for the other two
cutters and combs.
7 Reattach the shaving head holder to the
bottom part of the shaving unit.
C
8 To reset the shaver, press and hold the
On/Off button for approximately
7 sec.
7 seconds.
Replacing the SmartClean System
Cleaning Cartridge
C
Q For optimal cleaning results, replace the
cleaning cartridge when the replacement
indicator blinks orange or every 3 months.
C
1 While holding the SmartClean System
with one hand, press the cartridge release
2 button on the side of the SmartClean
1
System (1) and lift the SmartClean System
(2).
C
2 Remove the empty cleaning cartridge and
pour any remaining cleaning fluid out of
the cleaning cartridge.
You can safely pour the cleaning fluid down the
sink.
3 Discard the empty cleaning cartridge.
Contact your local town or city officials for
recycling information.
4 Remove the seal off the new cleaning
cartridge.
C
5 Place the new cleaning cartridge in the
SmartClean System.
ENGLISH
37