Technical Data - DeWalt D21585 Manual

DIAMOND DRILLING MACHINE
D21585
Congratulations!
You have chosen a D WALT tool. Years of
e
experience, thorough product development and
innovation make D WALT one of the most reliable
e
partners for professional power tool users.

Technical Data

Voltage
(U.K. & Ireland only)
Type
Power input
Power output
No-load speed
1st gear
2nd gear
3rd gear
Load speed
1st gear
2nd gear
3rd gear
Spindle thread
Protection class
Max. water pressure
Weight
DRILLING CAPACITIES
Drilling range in masonry
1st gear
2nd gear
3rd gear
maximum length
Drilling range in concrete
1st gear
2nd gear
3rd gear
maximum length
D21585
V 230
V 230/115
1
W 2,500/2,220
W 1,500/1,350
min 0–500
-1
min 0–1,200
-1
min 0–2,000
-1
min 0–290
-1
min 0–760
-1
min 0–1,280
-1
1 1/4" (Male)
I
bar 3
kg 11.2
mm 52-300
mm 52-300
mm 52-250
mm 400
mm 52-250
mm 52-200
mm 52-150
mm 400
Noise values and vibration values (triax vector sum) according to
EN61029-1:
L (emission sound pressure level) dB(A)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN61029 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off or
when it is running but not actually doing
the job. This may significantly reduce
the exposure level over the total working
period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
NOTE: This device is intended for the connection to
a power supply system with maximum permissible
system impedance Zmax of 0.28Ω at the interface
point (power service box) of user's supply.
The user has to ensure that this device is connected
only to a power system which fulfils the requirement
above. If necessary, the user can ask the public
power supply company for the system impedcance
at the interface point.
english
84.3
dB(A) 97.2
dB(A) 3
m/s 2.4
2
m/s 2 2.1
10 Amperes, mains
13 Amperes, in plugs
23