Advertisement
SOUND EFFECT: Selects a sound effect mode.
: Standby and Stops feedback of Google Assistant.
: Adjusts sound level of each speaker.
:Turns on or off the Night time mode.
FOLDER :Searches a folder.
: Displays the information of a file, an input source, a connected Bluetooth device name or an application name.
AUTO POWER: Automatically turns on by an input source.
REPEAT: Listens to your files repeatedly or randomly.
Replacement of Battery
Power consumption | Refer to the main label. |
AC adapter |
|
Dimensions (W x H x D) |
Approx. 1060.0 mm x 57.0 mm x 119.0 mm (with foot) |
Bus Power Supply (USB) |
5 V 500 mA |
Amplifier (Total RMS Output power) |
440 W RMS |
Design and specifications are subject to change without notice.
Rear Speakers Ready
Ready for surround sound with Rear Speakers Kit sold separately. (SPK8-S)
To enjoy content containing Dolby Atmos® and DTS:X®, the connected device and content must support Dolby Atmos® and DTS:X®.
|
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Do not install this equipment in a confined space such as a book case or similar unit.
Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to.
concerning the Power Cord
The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.
The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.
For safety marking information including product identification and supply ratings, please refer to the main label on the bottom or the other surface of the product.
Only use the AC adapter supplied with this device. Do not use a power supply from another device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.
Be careful to make sure children do not put their hands or any objects into the *speaker duct.
* speaker duct: A hole for plentiful bass sound on speaker cabinet. (enclosure)
OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.
For more information about Google's open source, visit device settings of Google Home app.
Disclaimers
For models using a battery
This device is equipped with a portable battery or accumulator.
Risk of fire or explosion if the battery is replaced by an incorrect type.
RF Radiation Exposure Statement
This equipment shall be installed and used at a minimum distance of 20 cm from the human body.
The use of the 5,150-5,350 MHz band is restricted to indoor use only. The restriction exists in the countries Australia (AU) and New Zealand (NZ). (For Wi-Fi/ Bluetooth built-in model or Wi-Fi built-in model)
Symbols
Refers to alternating current (AC). | |
Refers to direct current (DC). | |
Refers to class II equipment. | |
Refers to stand-by. | |
Refers to "ON" (power). | |
Refers to dangerous voltage. |
(Standby) Switches the unit ON or OFF.
F (Function) Selects function.
-/+ (Volume) Adjusts volume.
Play / pause
(Mic mute) Enables and disables Voice recognition.
Standby and Stops feedback of Google Assistant.
Reset the Unit
Press and hold the on the unit until you hear the beep sound once.
DC IN Connect to the AC adapter.
HDMI IN Connect to device with HDMI OUT.
HDMI OUT (TV eARC/ARC) Connect to a TV.
OPTICAL IN Connect to an optical device.
USB port Connect to a USB device.
Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack.
Place the wireless subwoofer near the sound bar and follow steps below.
If the subwoofer does not make sound, try to connect manually.
Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
Connect the sound bar and TV using Optical (A) or HDMI ARC (B).
All devices should be connected to same router.
Step.1 Install "Google Home" App
Download the Google Home App from the Google Play or App Store.
Step.2 Set up the Wi-Fi connection with app
In case of iOS devices, it should be turned on Bluetooth setting on your smart device.
Step 1. Connect the Wi-Fi
Make sure the unit connects to Wi-Fi by using "Google Home" app.
Bluetooth function is inactive before connecting to Wi-Fi.
Step 2. Change Function
Select the Bluetooth function by pressing F repeatedly.
Step 3. Find and Select your speaker name
Select speaker name that was set on "Google Home" app on the device list of your smart device. When successfully connected Bluetooth, "PAIRED" will appear on display window.
Make sure the unit is connected to Wi-Fi.
Case 1. Say "Hey Google"
The Google Assistant only responds to voice commands when you are using Wi-Fi or BT (Bluetooth) as the input. If you are using HDMI, Optical, ARC, Optical Sound Sync, or USB input, then you must use the button to activate the Google Assistant.
Case 2. Press
Voice command
With the Google Assistant built in, you can control compatible smart home devices such as TV's, lights, switches, plugs, thermostats and more by simply using your voice.
For more information, visit the below web site.
You can manage the speaker settings and control the speaker by using "LG Sound Bar".
Download "LG Sound Bar" on the App Store or Google Play Store.
AI Room Calibration is a sound tuning tool, which adjusts the audio settings of the Sound Bar based on the room acoustics and environment.
To access the AI Room Calibration it is necessary to install the "LG Sound Bar" app. On [Sound Setting] menu, choose [AI Room Calibration].
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the SN8YG that isn't answered in the manual? Leave your question here.