LG SN6 - Wireless Sound Bar Manual

Also See for SN6:

Owner's manual (42 pages)

Simple manual (6 pages)

Table of Contents

Contents

1 Front Panel
2 Rear Panel
3 Subwoofer Connection
4 TV Connection
5 Remote control
6 Additional Information
7 Documents / Resources
- 7.1 References
- 7.2 Download manual

LG SN6 - Wireless Sound Bar Manual

Front Panel

Please read this manual carefully before operating your set and retain it for future reference.

Front Panel

(Standby) - Switches the unit ON or OFF.
(Function) - Selects function.
(Volume) - Adjusts volume.

Rear Panel

Rear Panel
DC IN - Connect to the AC adapter.
USB (Service only) - S/W download connector.
OPTICAL IN - Connect to an optical device.
USB Port - Connect to a USB device.
HDMI IN - Connect to device with HDMI OUT.
HDMI OUT (TV ARC) - Connect to a TV.

warning

It is recommended that you purchase a USB gender separately for the convenience of USB insertion and extraction. (Recommended USB gender type: USB 2.0 extension cable)
Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack.

Subwoofer Connection

Place the wireless subwoofer near the sound bar and follow steps below.

Connect the power cord of the sound bar and the wireless subwoofer to the outlet.
Turn on the sound bar.
- The sound bar and wireless subwoofer will be automatically connected. The subwoofer's green LED turns on.

Manual Subwoofer Connection
If the subwoofer does not make sound, try to connect manually.

Press PAIRING on the rear of the wireless subwoofer.
- The green LED on the rear of the wireless subwoofer blinks quickly.
  (If the green LED does not blink, press and hold the PAIRING.)
Turn on the sound bar.
- Pairing is completed. The green LED on the rear of the wireless subwoofer turns on.

warning Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
To prevent wireless interference

TV Connection

Connect the sound bar and TV using Optical () or HDMI ARC ().

Optical Connection
1. Connect the sound bar to the TV using Optical cable.
2. Set up [External Speaker (Optical)] on your TV setting menu.
HDMI (ARC) Connection
1. Connect the sound bar to the TV using HDMI cable.
2. Set up [External Speaker (HDMI ARC)] on your TV setting menu.

warning

HDMI connection is unavailable if your TV does not support HDMI ARC.
If this unit is connected by OPTICAL and ARC at the same time, the ARC signal has a higher priority.

Additional Device Connection

Connect to the external device like as follow.
Set the input source by pressing repeatedly.

Remote control

: Skip/Search
: Play/Pause

Bluetooth connection lock (BT LOCK): Select the Bluetooth function by pressing repeatedly. Long press and press it again to limit Bluetooth connection to only BT and LG TV.
SOUND EFFECT: Selects a sound effect mode.
TV remote: Long press SOUND EFFECT and press it again to use TV remote control.
: Turns on or off the Night time mode.
: Displays the information of a file, an input source or connected Bluetooth device name.
Auto Power ON/OFF: Long press and press it again.
: Adjusts sound level of each speaker.
: This button is not available.

Replacement of Battery

Additional Information

Specification

Power consumption	Refer to the main label.
AC adapter	Model: DA-50F25 Manufacturer: Asian Power Devices Inc. Input: 100 - 240 V ~ 50 - 60 Hz Output: 25 V 2 A
AC adapter	Model: MS-Z2000R250- 050D0-P Manufacturer: MOSO POWER SUPPLY TECHNOLOGY CO., LTD. Input: 100 - 240 V ~ 50/60 Hz Output: 25 V 2 A
Dimensions (W x H x D)	Approx. 1060.0 mm X 57.0 mm X 85.0 mm With foot
Amplifier (Total RMS Output power)	420 W RMS

Design and specifications are subject to change without notice.

After Sales Service (Egypt Only)
Shelf Life Time: 2 Years
LG is committed to providing all spare parts of this device during the shelf life time.

Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses that have the obligations to disclose source code, that is contained in this product, and to access all referred license terms, copyright notices and other relevant documents please visit https://opensource.lge.com.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
This offer is valid to anyone in receipt of this information for a period of three years after our last shipment of this product.