FILE LOCATION: C:\Documents and Settings\sarah_cook\Desktop\Tsing
5
1
system board
3
USB daughter-card cable
connector
5
speaker cable connector
Replacing the System Board Assembly
CAUTION:
instructions that shipped with your computer.
NOTICE:
Ensure that any loose cables do not get caught beneath the system
board.
This procedure assumes that you have completed the removal procedure
"Removing the System Board Assembly" on page 95.
1 Insert the left side of the system board into the base of the computer at an
angle until the connectors on the system board are aligned with the holes
on the base of the computer, then carefully lower the system board into
place.
2 Replace the three M2.5 x 5-mm screws on the system board.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 4 / 0 9 - F O R P R O O F O N LY
96
System Board Assembly
Ma\SM\A01\EN\Source\sysboard.fm
1
4
Before you begin the following procedure, follow the safety
3
2
M2.5 x 5-mm system board screws (3)
4
card with Bluetooth technology cable
connector
2