Replacing The System-Board Assembly; Procedure - Dell Inspiron 15 5000 Series Service Manual

GUID-828BE30D-72EC-4782-A72D-288087A2AB2F
Replacing the system-board
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You must
enter the Service Tag in the BIOS setup program after you replace the
system board.
NOTE: Replacing the system board removes any changes you have made to
the BIOS using the BIOS setup program. You must make the appropriate
changes again after you replace the system board.
GUID-0F6C8740-9AC5-4E04-87E5-9BD430222F1B

Procedure

1 Replace the heat-sink
2 Connect the power-adapter port cable and power-button board cable to the
back of the system board.
3 Carefully turn the system board over.
4 Using the alignment post, place the system board on the palm rest and keyboard
assembly.
5 Align the screw hole on the system board with the screw hole on the palm and
keyboard rest assembly.
6 Replace the screw that secures the system board to the palm rest and keyboard
assembly.
7 Replace the screw that secures the heat-sink assembly to the system board.
8 Slide the speaker cable and coin-cell battery cable into the connectors on the
system board.
64
computer. After working inside your computer, follow
After working inside your
assembly.
computer. For more safety best
www.dell.com/
Before