GUID-A4C65F77-E1D1-4595-B52B-D281E90F786D
Removing the heat-sink assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
WARNING: The heat sink may become hot during normal operation. Allow
sufficient time for the heat sink to cool before you touch it.
CAUTION: For maximum cooling of the processor, do not touch the heat
transfer areas on the heat sink. The oils in your skin can reduce the heat
transfer capability of the thermal grease.
GUID-BA85A58B-5006-4CEE-BACF-CE1B91EE0CE0
Prerequisites
1
Remove the
optical
2
Remove the
base
3
Remove the
I/O
4
Remove the
hard
5
Remove the battery.
6
Remove the
memory
7
Remove the
wireless
8
Remove the
system-board
66
computer. After working inside your computer, follow
After working inside your
drive.
cover.
board.
drive.
modules.
card.
assembly.
computer. For more safety best
www.dell.com/
Before