GUID-8D2AE471-594B-46FC-808B-9037BC410EC5
Removing the touch pad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
GUID-5A58D3F3-36FE-4C9A-9C6A-8BAE136335F3
Prerequisites
1
Remove the
optical
2
Remove the
base
3
Remove the
I/O
4
Remove the
hard
5
Remove the battery.
6
Follow the procedure from step 1 to step 2 in
7
Remove the
memory
8
Remove the
wireless
9
Remove the
system-board
10 Remove the
heat-sink
GUID-BA8026F6-8646-449B-A76C-9ADDD43FCC38
Procedure
1
Open the latch and disconnect the keyboard backlight cable from the system
board.
2
Peel the status-light board cable and keyboard backlight cable off the touch pad.
70
computer. After working inside your computer, follow
After working inside your
drive.
cover.
board.
drive.
modules.
card.
assembly.
assembly.
computer. For more safety best
www.dell.com/
"Removing the status-light
Before
board".