GUID-120C147E-74A5-4381-A3D9-385D7BD8FAB4
Procedure
CAUTION: Place the system board on a clean and flat surface.
1
Disconnect the fan cable from the system board.
2
In sequential order (as indicated on the heat-sink assembly), loosen the captive
screws that secure the heat-sink assembly to the system board.
3
Remove the screws that secure the heat-sink assembly to the system board.
4
Lift the heat-sink assembly off the system board.
1
heat-sink assembly
3
system board
5
fan cable
2
M2x3 screws (3)
4
captive screws (4)
67