GUID-8EDA8A82-09F4-420D-8DE0-82220E44E1C2
Replacing the status-light board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
GUID-0E121E58-95D8-4153-9860-DB8761873E2C
Procedure
1
Place the status-light board into the slot on the palm rest and keyboard
assembly.
2
Press down the status-light board until it snaps into place.
3
Adhere the status-light board cable to the palm rest and keyboard assembly.
4
Slide the status-light board cable into the connector on the system board and
close the latch to secure the cable.
GUID-1F9A097D-6ED1-4162-8C96-329D29AC0D98
Post-requisites
1
Replace the battery.
2
Replace the
hard
3
Replace the
I/O
4
Replace the
base
5
Replace the
optical
computer. After working inside your computer, follow
After working inside your
drive.
board.
cover.
drive.
computer. For more safety best
www.dell.com/
Before
55