Important Notes - DeWalt DXAELJ16 Instruction Manual

WARNING – To reduce the risk of injury:
Follow these instructions and
those published by the battery manufacturer and manufacturer of any equipment you intend to use with
this unit. Review cautionary markings on these products and on engine.
INTRODUCTION
Congratulations on purchasing your new Lithium Jump-Starter / Power Bank. Read this
Instruction Manual and follow the instructions carefully before using this unit.

IMPORTANT NOTES:

• Several factors can affect a jump-starter's ability to boost a
vehicle's battery, including, but not limited to the size of the battery,
the temperature (hot or cold), whether the battery is damaged or
defective, and whether the jump-starter itself is fully charged.
• The jump-starter requires a minimum voltage to detect the
correct connection before it will begin to boost. If the vehicle battery
voltage is below approximately 2 volts, it may not be able to detect
connection and may not be able to start the vehicle. While this low
battery voltage is rare it may occur under extreme conditions.
8