Table of Contents
Advertisement
Third party system integration issues
Symptom
One or both systems no longer
operate
Dynalite controls operate
intermittently
To ensure safety and prevent damage to the system, appropriate isolation shall be provided. Only SELV/Class 2
(UL) systems shall be connected to non-isolated DyNet interfaces.
16
th
February 2022
Probable cause
•
Bus contention
(incompatibility)
•
Third party system (such as
such as AMX, DMX or
Crestron) is streaming
messages and overriding
DyNet.
Dynalite Hardware
.......................................
Installation Guide
.......................................
Page 22
.......................................
Solution
Install a suitable conversion
gateway/interface (for example, a
DTK622-232).
Install a suitable conversion
gateway/interface (for example, a
DTK622-232).
Disable or isolate DMX.
www.lighting.philips.com/dynalite
Advertisement
Table of Contents
