Operating Instructions; Panel - Bosch MISTCARE Nexxt 500 Series Operating, Care And Installation Instructions Manual

OPERATING INSTRUCTIONS

Before using
d WARNING
Before using your dryer, read and
follow all installation and operating
instructions.

Panel

A
A Start/Pause
B Option buttons
button
Add functions to the program
Starts, interrupts and selected. The option button
ends the drying process. LED is lit when the option is
selected. Press the option
Start/Pause LED Status
button again to turn the
Lit Red: Program is
option off (LED turns off).
running and "Pause" can
Delicates low temp: Press for
be activated.
temperature-sensitive textiles
Blinking: Settings can
(e.g. acrylic fibers). The
be changed, the drying
temperature of the drying process
cycle can be started, or
is reduced, the drying time is
program is in Pause"
extended correspondingly.
mode.
ECO
Not Lit: Program is
energy savings (use only for cotton
finished or there is no
and permanent press auto
program selected.
programs). Press the option
button prior to starting an
automatic program.
C Signal (500 Series)
Press the two option buttons at
the same time to enable an
acoustic signal that indicates the
end of the program (see page 45).
The 800 Series signal is set on the
LCD menu (see page 19).
All manuals and user guides at all-guides.com
D
B
C
e
: Press for additional
E
F
D Display
500 Plus Series
Indicates the estimated
remaining time of programs.
800 Series
Indicates the settings of the
additional options and the
estimated remaining time of
programs. (See page 19)
Additional Options
Menu selects one of the
additional options
Select changes the settings of
the selected option
E
Lint Filter LED
Blinks as a reminder to
clean the lint filter before
and after use. Lit (steady)
when the door is opened
during a program, or in the
event airflow is reduced
enough to create an E:01 error
(see troubleshooting guide,
page 25).
G
F Indicator Lights
LED'S light up in sequence to show the
current moisture state of the drying
process.
Wrinkle block - at the end of the drying
program an acoustic signal sounds and
the Wrinkle block LED lights up. The
drum rotates at specific intervals for one
hour to prevent the laundry from creasing
(see page 17 ).
G Program Selector
Switches the machine on and off and
selects the program (see page 17). Can be
turned in both directions.
To switch off the dryer, rotate the program
selector to Off".
15