Related Manuals for Toro Tree Forks
Summary of Contents for Toro Tree Forks
- Page 1 Form No. 3460-559 Rev A Tree Forks Compact Utility Loaders Model No. 22438—Serial No. 240000001 and Up *3460-559* Register at www.Toro.com. Original Instructions (EN)
-
Page 2: Table Of Contents
1. Location of the model and serial numbers Introduction Model No. These tree forks are intended to be used on a Toro Serial No. compact utility loader. They are designed to help you plant trees and large shrubs quickly and effortlessly,... -
Page 3: Safety
Safety Operating Tips ........... 6 Maintenance ............. 7 Recommended Maintenance Schedule(s) ..... 7 General Safety Greasing the Bearings ........7 Checking the Hydraulic Hoses ......8 Storage ..............8 Always follow all safety instructions to avoid serious injury or death. Troubleshooting ............ -
Page 4: Forks Safety
Forks Safety Keep the loader arms in the lowered and retracted position when on slopes. • Always lower the attachment and shut off the • Slopes are a major factor related to loss of control machine each time you leave the operating and tip-over accidents, which can result in severe position. -
Page 5: Safety And Instructional Decals
To best protect your investment and maintain optimal performance of your Toro equipment, count on Toro genuine parts. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specification of our equipment. -
Page 6: Operation
Important: Always use the traction unit to lift and move the attachment. Using the Tree Forks Note: The tree fork is an excellent tool for transporting balled and container grown trees and shrubs. You can also use the fork to move rocks. Maximum payload is 100 kg (220 lb). -
Page 7: Maintenance
Maintenance Recommended Maintenance Schedule(s) Maintenance Service Maintenance Procedure Interval • Grease the bearings. Before each use or daily • Check the hydraulic hoses. Every 100 hours • Grease the bearings. • Check the hydraulic hoses. Before storage • Paint chipped surfaces. •... -
Page 8: Checking The Hydraulic Hoses
Checking the Hydraulic Storage Hoses Before long term storage, wash the attachment with mild detergent and water to remove dirt and Service Interval: Every 100 hours grime. Before storage Check and tighten all bolts, nuts, and screws. Every 2 years—Replace the hydraulic hoses (or Repair or replace any part that is damaged or every 1500 hours, which ever comes first). -
Page 9: Troubleshooting
Troubleshooting Problem Possible Cause Corrective Action Fork does not open and close. 1. A hydraulic coupler is not completely 1. Check and tighten all couplers. connected. 2. A hydraulic coupler is damaged or 2. Check the couplers and replace any contaminated. - Page 10 Notes:...
- Page 11 The method of transmission shall be electronic transmittal. This machinery shall not be put into service until incorporated into approved Toro models as indicated on the associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in conformity with all relevant Directives.
- Page 12 The method of transmission shall be electronic transmittal. This machinery shall not be put into service until incorporated into approved Toro models as indicated on the associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in conformity with all relevant regulations.
- Page 13 The Toro Company (“Toro”) respects your privacy. When you purchase our products, we may collect certain personal information about you, either directly from you or through your local Toro company or dealer. Toro uses this information to fulfil contractual obligations - such as to register your warranty, process your warranty claim or to contact you in the event of a product recall - and for legitimate business purposes - such as to gauge customer satisfaction, improve our products or provide you with product information which may be of interest.
- Page 14 While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.
- Page 15 Toro importer. If all other remedies fail, you may contact us at Toro Warranty Company. Australian Consumer Law: Australian customers will find details relating to the Australian Consumer Law either inside the box or at your local Toro Dealer.