Chapter 3 Card Installation; Hardware Requirements; Installation Kit; Table 7: Jumper Configuration - Dell Mellanox ConnectX-3 User Manual

Dual port 40gb/s and 56gb/s mezzanine card
Table of Contents

Advertisement

Rev 1.0
3
Card Installation
3.1
Hardware RequirementsTBD
Before installing the mezzanine card, make sure that the system meets the hardware and software
requirements listed in
Table 7 - Jumper Configuration
Software Operating Sys-
tems/Distributions
3.2

Installation Kit

Make sure all of the parts are in the kit before you start the installation. If any parts are damaged or
missing, call your supplier immediately.
Installation Instructions
Installation of this mezzanine card should only be done by a properly qualified technician or engi-
neer. Installation or service not authorized by Dell or performed by unqualified personnel may
void guarantees and warranties. Read and follow all safety precautions specified in this document
and in the PowerEdge documentation.
18
Mellanox Technologies
Great user manuals database on
Requirement
Hardware
Used with Dell Blade Servers
Refer to the Dell Blade Servers Manuals
UserManuals.info
Description
Card Installation

Advertisement

Table of Contents
loading

This manual is also suitable for:

0j05yt0k6v3v

Table of Contents