Table of Contents
Advertisement
ConnectX®-3 Dual Port 40Gb/s and 56Gb/s Mezzanine Card for Dell User Manual
number. Please contact Mellanox System Support if you cannot find the firmware binary for your
mezzanine card.
The following steps describe how to retrieve the PSID (firmware identification) and programmed
firmware version of your mezzanine card. They also describe how to update the card with the lat-
est firmware version available.
1.
Retrieve the PSID and firmware version:
a. Install the MFT package. The package is available at
Software/Drivers => InfiniBand & VPI Software/Drivers => Firmware Tools. Make sure to
download the package corresponding to your computer's operating system.
b. Enter: mst start
c. Get the Mellanox mst device name using the command "mst status". The mst device name will be of
the form: /dev/mst/mt4099_pci_cr0
d. Get the PSID (firmware identification) and programmed firmware version using the command
2.
Compare the programmed firmware version with the latest available.
a. Go to Mellanox's web site:
b. Enter your card PSID to display the latest firmware
Great user manuals database on
> flint -d /dev/mst/mt4099_pci_cr0
Image type:
ConnectX
FW Version:
2.9.4000
Device ID:
4099
Chip Revision:
0
Description:
Node
Port2
GUIDs:
000002c900000200 000002c900000201
000002c900000202 000002c900000203
MACs:
000002c90200
000002c90201
Board ID:
(MT_1020110019)
VSD:
PSID:
http://www.mellanox.com/supportdownloader.
UserManuals.info
www.mellanox.com
q
Port1
Sys image
MT_1020110019
Rev 1.0
=> Products =>
See Figure 15
27
Mellanox Technologies
Advertisement
Table of Contents
