Related Manuals for Canon UJ122x8.2B AF
Summary of Contents for Canon UJ122x8.2B AF
- Page 1 BCTV Zoom Lens UJ122x8.2B AF UJ122x8.2B UJ111x8.3B UJ90x9B UJ86x9.3B UJ66x9B UJ27x6.5B XJ95x12.4B XJ95x8.6B XJ80x8.8B OPERATION MANUAL "Lens" Read this operation manual before using the product.
- Page 2 memo...
- Page 3 Thank you for purchasing the Canon BCTV zoom lens. This operation manual explains the functions and operating instructions for the Canon BCTV zoom lens. It also describes precautions for handling the lens. Read this operation manual carefully before using the product.
- Page 4 PRODUCT LIST Make sure that the following items are included in a package. (If you find any item missing, please contact the dealer from whom you purchased this product.) ① Lens body ② Hood Cap (attached to the lens) ③ Dust Cap (attached to the lens) ④...
- Page 5 5. Before use in particular environments, such as places This operation manual uses the following symbols and terms where chemical products are used, contact your Canon to identify hazards in order to prevent accidents. sales representative or dealer.
- Page 6 Canon sales representative or dealer. 5. Note that Canon may be unable to undertake servicing or repair of a product if it is modified without consulting Canon or your Canon sales representative.
-
Page 7: Table Of Contents
HOW TO MOUNT 1-1 Mounting the Lens onto the Camera .................E2 1-2 Mounting the Accessories for Full-servo Operation ..........E3 1-3 Mounting the Accessories for Semi-servo Operation ..........E6 1-4 Mounting the Accessories for Manual Control System ..........E6 PREPARATION 2-1 Initialize Operation (Not required for some models) ..........E8 2-2 Back Focus Adjustment .....................E9 2-3 Removing and Installing the Lens Shroud ..............E9 2-4 Iris Gain Adjustment ....................E9... -
Page 8: How To Mount
Camera When using the portable camera, the supporter to mount the lens is required. Depending on the camera models, the supporters which can be used with a camera differ. For details, contact your Canon dealer or your Canon sales representative. -
Page 9: Mounting The Accessories For Full-Servo Operation
1 HOW TO MOUNT 1-2 Mounting the Bottom compartment of the lens Accessories for Full- servo Operation Coupling B Lock Axis The servo demand is mounted and connected as shown in the figure below. When mounting the various demands, refer Groove to the operation manual for the respective demand. - Page 10 1 HOW TO MOUNT Mounting the Switch Box (Option) Mounting the Accessories for AF Operation (Only Models with AF Function) Mount the switch box to the panhandle of the tripod, using the attached clamp. The AF demand unit is mounted and connected as shown Connect the switch box to the lens, using the included in the figure below.
- Page 11 1 HOW TO MOUNT Macro Controller Lens “AUX (IS Controller)” Connector Large Lock Knob IS Operation Switch Small Lock Knob Fixing Belts IS Indicator Unit Clamper (or Viewfinder) Mounting Knob Handle Seeing the IS operating statuses in the Connect the cable connector (female) of the macro viewfinder controller to the connector of the macro controller.
-
Page 12: Mounting The Accessories For Semi-Servo Operation
1 HOW TO MOUNT Connecting the “VIRTUAL” Cable (Only Models with "VIRTUAL" Connector) The lens is equipped with the connector labeled “VIRTUAL” on its left side (as viewed from the camera). This connector can be used for connection with an interface to virtual systems. - Page 13 1 HOW TO MOUNT Mounting the flexible module It is necessary to mount the flexible module to the zoom and focus couplings located in the bottom compartment of the lens. NOTE The same flexible module is used for both zoom and focus couplings.
-
Page 14: Preparation E8
However, if the lens is operated in the position servo mode, the lens • UJ122x8.2B AF , UJ 122 x 8 . 2 B, UJ111x8.3B moves to the currently controlled position. • Models with the IESDA operation system •... -
Page 15: Back Focus Adjustment
(UJ122x8.2BAF, UJ122x8.2B, UJ111x, UJ90x, UJ86x, NOTE UJ66x: 10 to 15 m, UJ27x: 3 to 5 m, XJ95x, XJ80x: The lens shroud of UJ122x8.2B AF cannot be removed. 10 to 15 m, recommended). Use any object with sharp contrast to facilitate the adjustment work. - Page 16 2 PREPARATION <Top> Trimmer Adjustment Status (Excluding UJ122x8.2B AF) （a） Setting Support Remove the lens shroud from the lens body. b. Push the to place the cursor over "I-Gain". Check that DIP switch (iris control select switch) SW2 No. 4 is set to the “OFF” position (I.CAMERA).
-
Page 17: Iris Mode Setting
2 PREPARATION 2-5 Iris Mode Setting (Excluding UJ122x8.2B AF) DIP switch (iris control select switch) SW2 No. 4 was set to the “OFF” position at the factory. See the table below to find the relationship between the position of the switch and signals. -
Page 18: Setting On The Information Display
2 PREPARATION 2-6 Setting on the Information Display The table below shows the functions that can be set from the information display. For the detailed setting method, refer to the “Display Operation Manual”. Reference page Functions that can be set from the information display in Display Operation Manual Setting remote back focus... -
Page 19: Incorporable Focus Servo Demand (Option)
2 PREPARATION 2-7 Incorporable Focus STD (Standard mode): The Standard mode has the characteristics where the relationship Servo Demand between the rotation amount of the (Option*) control knob and the moving amount of the focus lens group is almost in linear. *Option only for DIGISUPER series. -
Page 20: Operation
3 OPERATION 3-1 Zoom and Focus ① Flexible module ② Flexible zoom control unit Operation ③ Flexible focus control unit ④ Flexible cable ⑤ Switch box unit Full-servo System Operation Semi-servo System Operation Zoom and Focus operations are performed based on a configuration as shown in the figure below. -
Page 21: Iris Operation
Changing settings for models that support Remote Back Focus require a service technician and cannot be performed with the following method. Please contact your dealer or Canon. Control from the Camera Setting the iris control select switch Both automatic and remote iris control are usually operated Settings must be performed at the lens side in order for the from the CCU. -
Page 22: Extender Operation
3 OPERATION 3-3 Extender Operation 3-4 Operating the AF (Auto Focus) Function Remote Operation (Only Models with AF Function) Remote controlling from the zoom servo An AF demand is necessary to operate the AF function. demand and switch box For more information about AF operation and AF function settings, please refer to the AF demand operation manual. - Page 23 3 OPERATION Setting the IS Preferences Information Display During shooting, the IS function can be turned ON/OFF using the IS operation switch or other accessory. Using the IS operation switch Press, release, or hold down the center button to control the IS function.
- Page 24 3 OPERATION Advanced settings of IS function Change the setting on the information display. For details on the information display, refer to the “Display Operation Manual”. Examples of typical combinations including the IS indicator unit are shown below. Shaded sections indicate that the IS indicator unit LED is lighted.
-
Page 25: Other Functions And Options
Dry air should be refilled at the periodic overhaul, and before the critical event. External Power Input Jack NOTE To refill dry air, gas canister and filling tool are required. Contact your Canon dealer or your Canon sales representative. -
Page 26: Specifications
5 SPECIFICATIONS UHD-DIGISUPER IESD ■ UJ 122 x 8 . 2 B AF UJ 122 x 8 . 2 B 1× 8.2–1000mm Focal Length 2× 16.4–2000mm Zoom Ratio 122 × 1:1.7（at 8.2–340mm） 1× 1:5.0（at 1000mm） Maximum Relative Aperture 1:3.4（at 16.4-680mm） 2×... - Page 27 5 SPECIFICATIONS IESD ■ UJ 111 x 8 . 3 B 1× 8.3–925mm Focal Length 2× 16.6–1850mm Zoom Ratio 111 × 1:1.7（at 8.3–340mm） 1× 1:4.65（at 925mm） Maximum Relative Aperture 1:3.4（at 16.6–680mm） 2× 1:9.3（at 1850mm） 9.6 × 5.4 mm Image Format (Diagonal 11 mm) 1×...
- Page 28 5 SPECIFICATIONS IESD ■ UJ86x9.3B 1× 9.3–800 mm Focal Length 2× 18.6–1600 mm Zoom Ratio 86× 1:1.7 (at 9.3–340 mm) 1× 1:4.0 (at 800 mm) Maximum Relative Aperture 1:3.4 (at 18.6–680 mm) 2× 1:8.0 (at 1600 mm) 9.6 × 5.4 mm Image Format (Diagonal 11 mm) 1×...
- Page 29 5 SPECIFICATIONS IESD/IESDA ■ UJ 90 x 9 B UJ 27 x 6 . 5 B 1× 9–810 mm 6.5–180mm Focal Length 2× 18–1620 mm 13–360mm 27 × Zoom Ratio 90× 1:2.4 (at 9–486 mm) 1:1.5（at 6.5–123mm） 1× 1:4.0 (at 810 mm) 1:2.2（at 180mm）...
- Page 30 5 SPECIFICATIONS IESD/IESDA ■ UJ 66 x 9 B 1× 9–600mm Focal Length 2× 18–1200mm 66 × Zoom Ratio 1:1.7（at 9-340mm） 1× 1:3.0（at 600mm） Maximum Relative Aperture 1:3.4（at 18-680mm） 2× 1:6.0（at 1200mm） 9.6 × 5.4mm Image Format （Diagonal 11 mm） 1×...
- Page 31 5 SPECIFICATIONS DIGISUPER ■IESD/IESDA XJ95x12.4B XJ95x8.6B 4:3 mode 4:3 mode 16:9 mode 16:9 mode (Only IESD) (Only IESD) 1× 12.4–1178 mm 8.6–820 mm Focal Length 2× 24.8–2356 mm 17.2–1640 mm Zoom Ratio 95× 1:2.5 (at 12.4–491 mm) 1:1.7 (at 8.6–340 mm) 1×...
- Page 32 5 SPECIFICATIONS ■IESD/IESDA XJ80x8.8B 4:3 mode 16:9 mode (Only IESD) 1× 8.8–710 mm Focal Length 2× 17.6–1420 mm Zoom Ratio 80× 1:1.7 (at 8.8–340 mm) 1× 1:3.55 (at 710 mm) Maximum Relative Aperture 1:3.4 (at 17.6–680 mm) 2× 1:7.1 (at 1420 mm) 8.8 ×...
- Page 33 EXTERNAL VIEW UJ122x8.2B AF...
- Page 34 UJ122x8.2B...
- Page 35 UJ111x8.3B...
- Page 36 UJ90x9B...
- Page 37 UJ86x9.3B...
- Page 38 UJ66x9B...
- Page 39 UJ27x6.5B...
- Page 40 XJ95x12.4B...
- Page 41 XJ95x8.6B...
- Page 42 XJ80x8.8B...
- Page 43 memo...
- Page 44 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo, 146-8501, Japan BT1-D004-B-ENG ©2022.09 CANON INC.