Related Manuals for Canon UJ122x8.2B AF
Summary of Contents for Canon UJ122x8.2B AF
- Page 1 BCTV Zoom Lens UJ122x8.2B AF INFORMATION DISPLAY Operation Manual (Information Display) Read this operation manual before using the product.
-
Page 2: Table Of Contents
8.2 IS operation switch setting (IS models only) ......17 8.3 IS mode setting (IS models only) ..........17 the written permission of Canon Inc. 9. Resetting to defaults ................. 17... -
Page 3: Basic Operation
Zoom stop characteristic settings for preset operations Analog demand curve characteristic settings Servo mode setting from zoom demand Sped The display turns off, and Cam mode setting changes to the settings Focus demand curve characteristics are saved. Iris compensation on/off setting Iris closure detection on/off setting Factory-set value BT1-D005-A-ENG ©2022.04 CANON INC. 1/20... -
Page 4: Menu Hierarchy
ON / OFF Stop 00 - 99 <CurveMode> Demand 1 - 9 <CamMode> CamMode 0 - 5 Control Sped / Posi On the Status screen, switch screens regardless of cursor. <Focus> Curve STD / FAR / NEAR BT1-D005-A-ENG ©2022.04 CANON INC. 2/20... - Page 5 Information about connected demands (see Table 1) Status Check Non-Supported / Non-connected <Demand L> Information about connected demands (see Table 1) Status Check Non-Supported / Non-connected <Func> Chr-Abb data Available / None Available / None Lumi-Comp data BT1-D005-A-ENG ©2022.04 CANON INC. 3/20...
-
Page 6: Top Screen And Sub-Screens
Setting screen ② Setting ⇒ Lens setting menus <Setting> I G : I-Gain: RBF: System Support screen ③ Support ⇒ × 2 Lens support information display menu <Support> I G : (cannot be configured) Interface: SerialNo. LensModelNo. BT1-D005-A-ENG ©2022.04 CANON INC. 4/20... -
Page 7: Status
Display item Auto Remote a demand. Status Auto iris mode Remote iris mode ⑤ Shows the mechanical lock status. (IS models only) Mech. Lock: Display item Status IS mechanical lock is on IS mechanical lock is off BT1-D005-A-ENG ©2022.04 CANON INC. 5/20... -
Page 8: Setting
5.2 PreMovement: Setting zoom start characteristics for preset operations Setting zoom stop characteristics for preset operations 5.3 CurveMode: Setting analog demand curve characteristics 5.4 CamMode: Cam mode setting 5.5 Control: Setting the servo mode from the zoom demand BT1-D005-A-ENG ©2022.04 CANON INC. 6/20... -
Page 9: Setting Remote Back Focus (Rbf Models Only)
Lighted Extinguished Tally: (D): Default value Cafs: Selection item – 000 end: Positive end of flange back knob Function 999 end: Negative end of flange back knob Default value: Set at the factory before shipment. BT1-D005-A-ENG ©2022.04 CANON INC. 7/20... -
Page 10: Setting The Tally Function On/Off
Selection item Selection item Function Enable the tally function Disable the tally function Function Enabled Disabled (D): Default value (D): Default value Selection item Function Enabled Disabled (D): Default value BT1-D005-A-ENG ©2022.04 CANON INC. 8/20... -
Page 11: Enabling/Disabling Camera Serial Communication
• 16 different codes in binary format are shown as you cycle through the setting option. • The lens code remains the same if settings are reset. Selection item 0000 – 1111 Default value: Set at the factory before shipment. BT1-D005-A-ENG ©2022.04 CANON INC. 9/20... -
Page 12: Accessing The Af Screen (Af Models Only)
Size to adjust <AF Frame> AF screen I G : to adjust Steps: Selection item – Function Slowest Fastest MoveSpeed: Default value: 5 Size Selection item – Function Fewest steps Most steps Default value: 3 BT1-D005-A-ENG ©2022.04 CANON INC. 10/20... -
Page 13: Accessing The Size Screen (Af Models Only)
– +015 Function Smallest Largest ResetSize Default value: 000 screen Vert Selection item -020 – +014 to select Function Smallest Largest Default value: 000 to confirm Selection item – Function Resets settings Maintains current settings BT1-D005-A-ENG ©2022.04 CANON INC. 11/20... -
Page 14: Accessing The Zoom Screen
Start characteristics default value: 99 Selection item – Stop characteristics default value: 91 Function Slow start Quick start Servo start characteristics default value: 50 Servo stop characteristics default value: 50 Mechanism end stop characteristics default value: 99 BT1-D005-A-ENG ©2022.04 CANON INC. 12/20... -
Page 15: Setting Analog Demand Curve Characteristics
Demand: Amount by which analog demand is tilted Zoom direction Wide angle Telephoto Selection item – to adjust Function No compensation Maximum compensation (D): Default value to confirm Selection item (D): Default value BT1-D005-A-ENG ©2022.04 CANON INC. 13/20... -
Page 16: Setting The Servo Mode From The Zoom Demand
As the opposite of Far mode, Near mode makes it easier to focus on nearby subjects, with curve characteristics at close range (Near mode) relaxed to increase close-range resolution. Selection item NEAR (D): Default value Infinity Close range Knob position BT1-D005-A-ENG ©2022.04 CANON INC. 14/20... -
Page 17: Accessing The Iris Screen
• The iris gain setting is not reset if settings are reset as described on page 1. Selection item – Function Minimum gain Maximum gain Auto iris gain default value: 50 Remote iris gain default value: 90 BT1-D005-A-ENG ©2022.04 CANON INC. 15/20... -
Page 18: Setting Iris Closure Detection On/Off
Disables IS mechanical Enables IS mechanical OffState: Function detection to off. lock lock (D): Default value Selection item Function Iris closure detection No iris closure detection Default value: Set at the factory before shipment to suit the camera interface. BT1-D005-A-ENG ©2022.04 CANON INC. 16/20... -
Page 19: Is Operation Switch Setting (Is Models Only)
Zoom start characteristic settings for preset operations Zoom stop characteristic settings for preset operations Analog demand curve characteristic settings Servo mode setting from zoom demand Sped Cam mode setting Focus demand curve characteristics Iris compensation on/off setting Iris closure detection on/off setting Factory-set value BT1-D005-A-ENG ©2022.04 CANON INC. 17/20... -
Page 20: Support
Camera interface information <SerialNo.> LensModelNo. <LensModelNo.> SerialNo. screen I G : I G : screen UJ122x8.2B AF I Example of display 2. SerialNo Goes to serial number screen 3. LensModelNo. Goes to lens model number screen 4. Firmware Goes to firmware information screen Display item Lens serial no. -
Page 21: Displaying Firmware Information
Display Status Check is Table at right* Non-Connected item unavailable Demand with Compatible demand unsupported No demand Status connected functions connected connected *Items in the table at right are shown when connected to compatible demands. BT1-D005-A-ENG ©2022.04 CANON INC. 19/20... -
Page 22: Support Information For Lateral Chromatic Aberration Correction
I G : :Available Support information Lumi-Comp data for peripheral :None illumination correction Display Available None item Does not support Supports communication communication of of compensation data with Status compensation data with the camera the camera BT1-D005-A-ENG ©2022.04 CANON INC. 20/20...