Table of Contents
Advertisement
Setting
Setting - <Setting> - <Iris> - Close
7.3 Setting iris closure detection on/off
This iris cannot be closed when an extender (2.0×) is inserted
with iris compensation set to on. As a recourse, you can set this
function, which does close the iris when iris closure is detected.
Iris screen
<Iris>
I G :
5 0
[ I-Gain ]
Comp:
ON
Close:
OFF
× 3
<Iris>
I G :
5 0
[ I-Gain ]
Comp:
ON
Close:
OFF
to select
Note
Depending on the camera, correct iris operation may not be possible due to interaction
between lens iris compensation and camera iris control. In this case, set iris closure
detection to off.
Selection item
ON
Function
Iris closure detection
Default value: Set at the factory before shipment to suit the camera interface.
BT1-D005-A-ENG
Setting - <Setting> - <IS>
8. Accessing the IS screen
Moves to a screen for configuring a variety of IS settings.
Setting screen
* Iris closure detection takes
effect and this menu item
is shown when [Comp] (iris
compensation) is set to on.
IS screen
OFF
No iris closure detection
(IS models only)
<Setting>
I G :
5 0
I-Gain:
50
RBF:
000
System
× 8
<Setting>
I G :
5 0
Iris
IS
Reset All
<IS>
I G :
5 0
Mech.Lock :
OFF
SwSetting:
Alt
OffState:
OFF
©2022.04 CANON INC.
Setting - <Setting> - <IS> - Mech.Lock
8.1 IS mechanical lock setting
IS can be forcibly locked during shooting.
<IS>
IS screen
I G :
5 0
Mech.Lock :
OFF
SwSetting:
Alt
OffState:
OFF
<IS>
I G :
5 0
Mech.Lock :
OFF
SwSetting:
Alt
OffState:
OFF
to select
Selection item
OFF
(D)
Disables IS mechanical
Function
lock
(IS models only)
ON
Enables IS mechanical
lock
(D): Default value
16/20
Advertisement
Table of Contents
