Maintenance; Recommended Maintenance Schedule(S); Pre-Maintenance Procedures; Preparing The Machine For Maintenance - Toro 02720 Operator's Manual

Maintenance

Note:
Determine the left and right sides of the
machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
Before each use or daily
Every 50 hours
Every 400 hours
Pre-Maintenance
Procedures
Preparing the Machine for
Maintenance
1. Park the machine on a level surface, disengage
the PTO, and engage the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Disconnect the spark-plug wires.
Maintenance Procedure
• Inspect the blades for wear or damage.
• Clean under the guards.
• Check the rubber discharge guards.
• Grease the fittings.
• Check the gearbox oil level.
• Check the brake.
• Check the rotor drive belt for wear or damage.
• Check the gearbox drive belt for wear or damage.
• Grease the internal parts.
7