Installing The Cooktop - LG CBGS3028 Series Installation Manual

en-us_main.book.book Page 8 Friday, November 4, 2022 8:08 AM
8 INSTALLATION
-
A Width of upper plate
B Depth of upper plate
C Height of cooktop base
D Width of cooktop base
E Depth of cooktop base
F Width of cutout
G Depth of cutout
H Distance from cutout to side wall on the left of unit. /
Distance from cutout to side wall on the right of the
unit.
I Distance from front edge of cutout to front edge of
countertop
J Distance between cutout and the wall behind the
cooktop
K Width of unprotected overhead cabinets
L Depth of unprotected overhead cabinets
M Clearance from countertop to unprotected overhead
surface
N Clearance from countertop to nearest cabinet on
either side of unit

Installing the Cooktop

Installing the Cooktop Unit
1
Locate the electrical outlet and gas shut-off
valve beneath the cabinet.
Never reuse old flexible connectors.
Install a manual shut-off valve
line in an easily accessible location outside the
cooktop. Be sure you know how and where to
shut off the gas supply to the cooktop. Install
the electrical outlet 12˝
countertop.
2
Carefully lower the cooktop into the
countertop cutout, making sure not to trap
any wires.
Dimension/Clearance
in the gas
b
below the
a
30" Cooktop
30" (760mm)
21 11/16" (533mm)
3 3/4" (95 mm)
28 1/4" (717 mm)
19 3/8" (492 mm)
28 1/2" (724 mm)
19 5/8" (498 mm)
2 11 13/16" (300 mm)
1 5/8" (41 mm)
2
2 3/4" (69 mm)
2
30" (760 mm)
2
13" (330 mm)
1
2 30" (760 mm)
2 18" (457 mm)
3
Remove the retainer brackets from the
literature package.
4
Install the retainer brackets
of the cooktop unit . then snug the screws
c
against the bottom of the countertop
b
shown.
36" Cooktop
36" (915mm)
33 5/8" (854 mm)
33 7/8" (860 mm)
36" (915 mm)
2
to the bottom
a
as
d