Philips ADD5980M User Manual page 35

5. The Descale Button will ash and the appliance will run a descale process. It will need
around 30 mins. Caution: Dispense solution will be hot.
6. When the water tank is empty, re ll with 2 liters of cold water and long press the Descale
Button again.
7. The appliance will run a cleaning cycle. Caution: Dispense solution will be hot.
8. The Descale Button will turn o once complete.
9. Re-insert the lter after descale process is complete.
Note
• During descaling, press Dispense Button to pause, and press Descale or Dispense Button
to restart.
• The descale process cannot be stopped till it is nished.
• When it is time to descale, you can not dispense water at or above 40℃ until you perform
descaling. You can only dispense cold or ambient water.
Replacing the lter cartridge
To ensure the best performance, please change the lter cartridge according to the Filter
Lifetime Indicator, or the suggested replacement cycle.
• Please clean and install the lter cartridge as per the rst time cleaning instruction above.
• Reset the lter lifetime by long press
Model
AWP210/AWP211/AWP212
Filter lifetime indicator ashes: the lter is about to reach the end of life.
Filter lifetime indicator lights up constantly: the lter reaches the end of life.
Note
• Water is a foodstu . We recommend using the ltered water within 1 day. If the appliance
is not used for more than 72 hours ll it twice with cold water and empty the water before
continuing to use it normally.
• Do not over ll the water tank, do not ll above the "max" ll to avoid risk of water over ow
in the raw water tank.
and for 3 seconds.
Suggested Replacement Cycle
After 100 liters or every 30 days, whichever comes rst.
EN 31