Optimise Standby - Miele G4203SCU Operating Instructions Manual

Programme options

Optimise standby

"Optimise standby" is activated by
default.
To save energy, the dishwasher will
switch off automatically a few minutes
after the last time a button has been
pressed or after the end of a
programme.
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.
"Optimise standby" can be switched off
if you prefer. If you do this, the duration
before the dishwasher switches off
increases to 6 hours. Doing this will
increase energy consumption.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the / button in and, whilst
holding it in, switch the dishwasher
on using the  button.
Keep the / button pressed in for
at least four seconds until the /
indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
62
 Press the  button eight times.
The  indicator light will flash rapidly
eight times at intervals.
The flashing sequence in the display
shows whether Optimise standby is
activated or not.
–  : "Optimise standby" is switched
on.
–  : "Optimise standby" is switched
off.
 Press the / button to change the
setting.
The setting is now stored in memory.
 Switch the dishwasher off with the 
button.