Related Manuals for Mitsubishi Electric MP-G10-AT
Summary of Contents for Mitsubishi Electric MP-G10-AT
- Page 1 INDUSTRIAL SEWING MACHINE Attachment MODEL MP-G10-AT MP-G20-AT MP-G40-AT TECHNICAL MANUAL Pneumatic 2-Step Tensioner A180E625P02...
-
Page 2: For Safe Use
FOR SAFE USE Before the installation, operation, and inspection for this product, read the “FOR SAFE USE” and the technical manuals carefully. Also read the other technical manuals, “Sewing Machine Head”, “Control Unit” and “Operation Panel” describing some instructions, which are not in this manual, and use the sewing machine properly. -
Page 3: Applicable Models
It allows you to load in two stages the tension of the upper thread. Differences in the thread tension, caused by changes in the stitching direction or thickness, are eliminated. 2. Applicable models Name Applicable models MP-G10-AT PLK-G1010 MP-G20-AT PLK-G2010R/G2516/G2516R/G2516-YU MP-G40-AT PLK-G4030/G6030/G5050/G5050R/G10050/G10050R 3. - Page 4 4. Configuration The Fig. numbers in the drawing correspond to the part numbers given in the following explanations. When ordering service parts, please specify in the Parts No. (M********). 4.1 Pneumatic 2-step tensioner mechanism - 2 - From the library of Superior Sewing Machine & Supply LLC - www.supsew.com...
- Page 5 4.1 Pneumatic 2-step tensioner mechanism (Parts list) 部品コード 数量 品 名 Description Parts No. Amt. Req. M91610046 ﾂﾏﾐﾈｼﾞ Thumb nut MT60A0802 ﾏﾜﾘﾄﾞﾒ Thumb nut revolution stopper MN52A1245 ｴﾝｽｲﾊﾞﾈ Thread tension spring MH40A0556 ﾁｮｳｼｻﾞﾗｵｻｴ Disc retaining plate MF10A0555 ﾁｮｳｼｻﾞﾗ Thread tension discs M90235060 ﾋﾟﾝ...
- Page 6 4.2 Pneumatic pressure control unit MP-G10-AT MP-G20-AT MP-G40-AT 4.3 Accessories - 4 - From the library of Superior Sewing Machine & Supply LLC - www.supsew.com...
- Page 7 4.2 Pneumatic pressure control unit (Parts list) 部品コード 数量 品 名 Description Parts No. Amt.Req. MH25A1601 ﾃﾞﾝｼﾞﾍﾞﾝﾄﾘﾂｹｲﾀ Valve mounting plate M91066004 SW-PW ﾌﾟﾗﾏｲﾅﾍﾞﾈｼﾞ M4X25 Screw M4X25 ME10X0599 ﾃﾞﾝｼﾞﾍﾞﾝｸﾐﾀﾃ Solenoid valve assy M90511050 ｻﾞｶﾞﾈ 5 Washer 5 M95003017 ｾﾌﾃｨｿｹｯﾄ M5X8 Safety socket bolt M5X8 MH10W0508 ｾﾂｿﾞｸﾃﾞﾝｾﾝｸﾐﾀﾃ...
-
Page 8: Assembly Procedures
Fig.1 5.2 Installing the pneumatic pressure control related parts and piping ( in the case of MP-G10-AT ) (1) Please fix with two wood screws provided the pneumatic pressure control unit of sewing machine table underside as shown in Figure 2. - Page 9 5.3 Installing the pneumatic pressure control related parts and piping ( in the case of MP-G20-AT ) (1) The 0 to the air pressure by turning the pressure adjustment knob of the filter regulator, and remove any residual pressure. (2) Remove the cover of the sewing machine body left side, remove the packing and C blanking plate D from the solenoid valve as shown in Figure 4, install the solenoid valve attached.
-
Page 10: Operation
5.5 How to setup and cable connection Insert the connector of the solenoid valve assembly in to the general purpose output connector CON M (15P). CON M (General purpose output) Function name Default value Pin No. Function code outpu t 1 +24V +24V 6. - Page 11 MEMO From the library of Superior Sewing Machine & Supply LLC - www.supsew.com...
- Page 12 Printed in Japan From the library of Superior Sewing Machine & Supply LLC - www.supsew.com...