Operation; Training Period; Operating Tips - Toro Reelmaster 5010-H Series Operator's Manual

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.

Training Period

Before operating the verticutter reels, evaluate the
performance of the reel at the desired setting. Operate in a
clear, unused area to determine if the desired results will be
achieved. Adjust as desired.

Operating Tips

1. Operate the traction unit at full throttle, full reel speed
(setting 9) and at the desired traction speed.
2. The maximum recommended blade penetration depths
are as follows:
•
Model 03618 is 3 mm (1/8 inch).
•
Model 03619 is 6 mm (1/4 inch).
3. Power requirements to operate the verticutter reels will
vary with turf and soil conditions. Travel speed may
need to be reduced in some conditions.
4. When operating in turf conditions where much debris
is encountered, or unusually heavy thatch, open the
front and rear discharge shields to help allow the debris
to discharge from the reel.
CAUTION
Thrown debris could cause personal injury.
Do not open the rear shield so that it is higher
than level to the ground.
11