Selecting The Internal Fault Test; Selecting The Ied Blocked Or Ied Test And Blocked Mode - ABB ABILITY SSC600 Operation Manual

Commissioning
3.5.3

Selecting the internal fault test

The internal fault test can be activated from the IED test view.
1.
2.
3.
4.
3.5.4

Selecting the IED blocked or IED test and blocked mode

The IED blocked mode and the IED test and blocked mode can be activated from
the IED test view. The test mode can be used for simulated testing of functions and
outputs without providing current inputs. The IED blocked mode can be used to
block the physical outputs to the process.
1.
2.
3.
4.
26
Select IED test from the main menu structure to activate the IED test view.
Figure 6: IED test view
Enable parameter editing by selecting Enable Edit.
Select the test mode to be activated by changing the New Value field selection.
Select Write to device to save changes into the IED's memory.
The selected test mode is now activated.
Select IED test from the main menu structure to activate the IED test view.
Figure 7: IED test view
Enable parameter editing by selecting Enable Edit.
Select the test mode to be activated by changing the New Value field selection.
Select Write to device to save changes into the IED's memory.
The selected test mode is now activated.
1MRS758850 D
SSC600
Operation Manual