Activating Programmable Virtual Leds - ABB ABILITY SSC600 Operation Manual

Smart substation control and protection for electrical systems

Hide thumbs Also See for ABILITY SSC600:

Table of Contents

1MRS758850 D

4.3.2

Settings for different operating conditions

IED settings can be designed for various operation conditions by defining different

setting values to different setting groups. The active setting group can be changed

by the IED application or manually via the WHMI or PCM600.

4.3.3

Activating programmable virtual LEDs

SSC600

Operation Manual

Select IED Configuration > Configuration > Programmable LEDs.

Select General to set the alarm color for the programmable LEDs.

Enable parameter editing by selecting Enable edit.

Figure 31: Enabling parameter editing

Select Write to device to save changes into the IED's memory.

Select LED 1 ... LED 100 to define the alarm mode and description for each

programmable LED.

Enable parameter editing by selecting Enable edit.

IED operation

Table of Contents