Motorola iDEN i2000 User Manual page 157

Getting Started
To connect your phone to your laptop or other
device:
1 Open the connector cover.
2 With the phone's display facing up, insert the
data cable's connector into the accessory
connector, until you hear a click.
connector
cover
3 Insert the data plug into the COM port of your
laptop or other device.
Make sure no other application is using the COM
port selected.
Make sure the COM port settings of your laptop or
other device are set to the following:
• Bits per second: 4800
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: Hardware
Using GPS with Map Software
145