Assigning A Ring Tone Or Picture - Motorola iDEN i2000 User Manual

Contacts
3 If you want to assign a ring tone or picture to the
entry, select [Ring Tone/Picture]. See
"Assigning a Ring Tone or Picture" on page 34.
4 To assign a Contacts type to the number or
address being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
Note: For information about creating SDG lists,
see "Creating SDG Lists in Contacts" on
page 56.
5 To store a number or address:
Select the # field (or ID for an email address, or
IP for an IP address).
Enter the number or address. For phone
numbers, use the 10-digit format. For email
addresses, see "Entering Text" on page 65.
Tip: Press under Browse to select a number
or address from Contacts, the recent calls
list, or Memo.
When you are finished, press
6 If you want to change the default Speed Dial
number or a create a voice name for the entry,
select [Options]. See "Assigning a Speed Dial
Number or Voice Name" on page 35.
34
7 If you want to add more numbers or addresses
8 Press

Assigning a Ring Tone or Picture

1 If you have not already, select [Ring
2 If you want to assign a ring tone from the list of
3 If you want to assign a picture from the media
.
to the entry:
Scroll past the information you already entered.
Enter the additional information for the entry
using step 3 through step 6. You must assign a
name to the entry, if you have not already.
under Save.
Tone/Picture].
ring tones:
With Ringer highlighted, scroll left or right to
choose a ring tone. -or-
Select Ringer. Select the ring tone you want to
assign.
center:
Scroll to Picture. Scroll left or right to choose a
picture. -or-
Select Picture. Select the picture you want to
assign.