Table of Contents
Advertisement
Message
This disc is protected and not
recordable.
Disc is full.
(No area for new recording)
You cannot record more than
99 titles on one disc.
(The maximum is 99.)
You cannot record more than
999 chapters on one disc.
(The maximum is 999.)
You cannot record on this disc
as Control Information is full.
You cannot record on the disc
as Power Calibration Area is
full.
This disc is already finalized.
Can not record on this disc.
If an error occurs during the timer recording, one of the following error numbers (40 to 42) or the above error
messages (error number: 1 to 39) is displayed on the recording menu after timer recording.
(Once the screen of the program line is exited, the program line for the error will be cleared.)
(No Error Message is displayed for the error No. 40 ~ 42.)
Example : D-VR16SB
Timer Programming
Date
*
JAN/01
2.
---
3.
---
4.
---
5.
---
6.
---
7.
---
8.
---
The speed mode changes to the error number.
A program with the error number is grayed out and asterisked on the timer programming list.
Message
Error message is not
displayed.
Solution
Release the disc protect
setting in the Disc Setting
menu.
Insert the recordable disc with
enough recording space.
Delete unnecessary titles.
Delete unnecessary chapter
markers.
Delete unnecessary titles.
Insert a new disc.
Release the finalizing for this
disc.
Repeat the same operation.
VCR DVD
DVD
Start
End
CH
Mode
PDC
VCR
12:57AM
1:57AM
8
DVD E40
ON
Solution
- Set the timer programming
correctly.
- Set the timer programming
before the start time.
- Insert a recordable videotape
with a record tab.
Turn the power on and set the
clock correctly then set timer
programming again.
Insert the recordable disc.
Error
Error Description
No.
29
Disc Protected Disc.
30
No available recording space.
Its recording capacity has been reached.
31
(Video Format Disc)
Its recording capacity has been reached.
32
(VR Format Disc)
The 999 chapter has been reached. (VR
33
Format Disc)
There is not space to record field of
34
control information.
35
PCA is Full. (in REC start)
36
It is finalized. (Video Format Disc)
37
Access to Memory Area range outside.
38
Sector Address is wrong.
39
BUP writing error of chapter editing.
Example : D-VR40SF
Timer Programming
Date
Start
End
*
JAN/01
12:57AM
1:57AM
2.
---
3.
---
4.
---
5.
---
6.
---
7.
---
8.
---
Error
Error Description
No.
- Some portion has not been recorded
because of program overlapping.
40
- Recording did not start at the start time.
- No Videotape is inserted.
Videotape ran out during recording.
41
Power failed
42
No disc when recording
1-11-3
Priority
VCR DVD
VPS
DVD
CH
Mode
VCR
PDC
8
DVD E40
ON
Priority
E9BA1FIS
7
5
7
8
9
10
4
6
-
-
-
-
-
-
Advertisement
Chapters
Table of Contents
