Scan Assist Pro Creator; Overview; Protocol Export From Vivid S70 / S60 And Off-System Installation Of The Scan Assist Pro Creator - GE Vivid S70 User Manual

Customize Configuration

Overview

Protocol export from Vivid S70 / S60 and off-system installation of
the Scan Assist Pro Creator
NOTE:
12-76

Scan Assist Pro Creator

The Scan Assist Pro Creator is used to build customized
Protocols that can be imported onto the Vivid S70 / S60. These
Protocols automate many of the steps normally performed
manually by the user, thereby reducing the number of user
actions and the amount of time to perform an exam.
The Scan Assist Pro Creator tool can be used both on the
system and as an off-system tool. Where there are differences
in behavior, this user manual uses the term "on-system" to
indicate when the tool is running on the system and "off-system"
to indicate when the tool is running off the system.
The installation of the Scan Assist Pro Creator on a PC can be
done after exporting the installation file from the Vivid S70 / S60.
The factory and user-defined Protocols can also be exported for
editing with the Scan Assist Pro Creator.
1. Insert the USB media to save the files.
CD/DVD are not supported for this function.
2. Press Protocol on the Control panel and Config on the
Touch panel. Log on if required.
The Scan Assist Pro sheet is displayed.
–
Vivid S70 / S60 User Manual
BC092760-1EN 01